[. . . ] If you are attaching the device to the printer, ensure that you do not block vents or access doors. 3 4 4. 1 4. 2 4. 3 110V/220V 50/60 Hz Plug the Ethernet cable into your printer and the Wireless Print Solutions Adapter. Plug in the power adapter to a wall outlet (110 V/220 V AC) or a power strip. Wait until the Status LED flashes amber. www. xerox. com/office/WPSAsupport Setting up the Connection Using the Web Interface There are 2 Web Interface formats: PC/Laptop Display: There are five main tabs across the top of the screen. Mobile Device Display: The main tabs are arranged vertically. [. . . ] To expose the tabs, touch the icon at the top of the screen. 1 2 192. 168. 0. 1 2. 1 192. 168. 0. 1 admin wpsa-xxxx 2. 1 2. 3 PASS On your computer or mobile device, navigate to your list of available wireless networks. Select the available network that appears as wpsaxxxx where xxxx is the last four characters of the MAC address of your adapter (not the Wireless MAC address). You can find the MAC address on the label that is located on the bottom of your adapter. To access the web interface of the Wireless Print Solutions Adapter, open a browser. In the URL field, enter the default IP address of 192. 168. 0. 1, then press Enter or Go. Note: The default User Name is admin and the default Password is PASS. For details, refer to your printer documentation. 3 Locate the IP address of your printer. To find the IP address, at the printer control panel, open the Machine Status screen, or print a Configuration Page. For Xerox® printer documentation, go to www. xerox. com/support. 4 Open the Wireless Print Solutions Adapter Web Interface. For details, see steps 1 and 2 in Setting up the Connection Using the Web Interface. www. xerox. com/office/WPSAsupport 5 6 Click the Printer tab. For Add Printer, enter the IP Address and name of your printer, then click Add Printer. When the web page refreshes, to verify correct installation and operation, click Print Test Page. [. . . ] For Add Printer, enter the IP Address and name of your printer, then click Add Printer. When the web page refreshes, to verify correct installation and operation, click Print Test Page. For troubleshooting and additional help information, refer to www. xerox. com/office/ WPSAsupport. [. . . ]